toll free (877) 723-3766
fax (610) 539-1630

HOME
CONTACT
Safety Rail Source Logo
"Your Single Source For Modular Safety Railings"

GSA Logo
Federal Supply Schedule
Contract No.
GS-07F-0224N
Skylight Railings & Screens
Fall Protection,
OSHA Compliant
(Commercial & Industrial)
  Model # Information
Desired
Selection
Criteria
Skylight Railing
click photo to enlarge
KeeGuard®
Skylight
 Railing
 System
Please contact Safety
Rail Source for
this information.
Freestanding, non-penetrating permanent protection of skylights.  Can be installed to be invisible from below.
Skylight Railings
click photo to enlarge

KeeDome®
Skylight
 Railing
 System
Kee Dome, is a free-standing, fall-protection solution for use around skylights, roof lights and dome lights up to 7' x 7'.
STS
(patented)
Skylight screens for acrylic dome skylights.  Clamp-on design for EZ install and no skylight penetrations.

MODELS & SIZES
Skylight Railings & Screens
click photo to enlarge
SRS
(patent pending)
DATA SHEET

INSTALLATION

SPECIFICATIONS
Skylight screens for acrylic dome skylights. Screen is fastened into the skylight frame. Installation is fast and EZ. It cannot be installed on skylights with a dome height greater than 20" from the roof.

MODELS & SIZES
Saf-T-Screen Skyligth Screen Model SSS
click photo to enlarge
SSS
Skylight screens for trapezoidal standing seam roofs.  Clamp-on design for EZ install and no skylight or roofing penetrations.

MODELS & SIZES
SCS
Skylight screens for corrugated fiberglass skylights.  Designed with 2 steel channels for extra strength.

MODELS & SIZES

About Our Skylight Railings and Screens Fall Protection

Our commercial and industrial skylight railings and screens prevent falls through skylights.  According to OSHA statistics, these accidents are a major cause of death from falls.  The Safety Rail Source provides the solutions for protecting against such falls with our E-Z to install, non-penetrating product line.  Our skylight railings and screens meet OSHA standards and are designed to withstand up to a 400 pound load requirement if required.  Our skylight screens include protection for domed, standing seam and corrugated skylights.  For larger skylights, we offer KeeGuard Skylight Railing Systems.  In our screen product line, we offer galvanized or stainless steel mesh.  Installation of our skylight protection products is easy, quick and can be performed either by your contractor or your maintenance staff.  Installation with our STS and SSS models is completed with an engineered clamp-on type connection.  Our skylight railings are free-standing and non-penetrating and manufactured with heavy duty galvanized pipe and fittings.  They are shipped in a kit and assembled with a hex key. 

Materials For Skylight Railings

Pipe for handrails, mid-rails, uprights and counterweight connection are a galvanized mill finish to the requirements of ASTM A53. Kee Klamp® Fittings are galvanized to meet ASTM A153. Railing consists of top rails, mid rails, uprights, counterweights and connections. All pipe connections are Kee Klamp structural pipe fittings manufactured to the requirements of ASTM A47-77-32510. Railing assembly is capable of withstanding a load of at least 200 pounds applied in any direction at any point on the top rail. KeeGuard can be designed to withstand higher loads if required. Just let us know your requirements and we'll do the design work.

Installation of Skylight Railings
The Safety Rail Source skylight railings are fast and E-Z to install and do not penetrate the roofing membrane. A 2 man crew can install more than 300' of KeeGuard skylight railing railing per day. Detailed installation instructions are included with all of our skylight railings and screens.