Call Us (877) 723-3766

FAX (610) 539-1630

KeeGuard Standard

KeeGuard Standard OSHA Compliant roof edge fall protection railing system removes the risk of workers and other personnel from accidentally falling off a roof. This system utilizes a counterbalance weighted system. The Safety Rail Source system is installed along the roof edge and complies with OSHA Standards 29 CFR 1910.23. The railings extend above the walking surface 42" and withstand a force of 200 pounds applied to the top rail.

KeeGuard Standard is engineered to be free standing meaning that the railing system is not attached to the roof surface or the building structure underneath. The system uses recycled PVC weights as ballast attached to a lever tied into railing upright posts. It sits on top of the roof. Top and mid railings are attached to the posts using type 135 drop in fittings. A neoprene pad is glued to the post base to protect the roofing membrane.

KeeGuard Standard is manufactured with 2" OD galvanized tubing with galvanized modular fittings. Railing fittings and components are delivered on skids, railing pipe is bundled. Skids and bundles are marked per location to be installed. Railing system components are assembled using a hex key. For exact fit, top and mid railings are field cut at corners, jogs and terminations using a reciprocating saw. No welding is necessary with our railing system.

KeeGuard Standard is designed for flat or low slope roofs and can be used for bi-level or multi-level roofs. Its configuration accommodates varying angles, circular configurations, ladders and rooftop obstructions. Its base fitting accommodates a 4" high extruded aluminum kick plate.

All our railing systems meet the following North American and Canadian Requirements:

  • OSHA Standard 29 CFR 1910.23

  • OSHA Standard 29 CFR 1926.501, 29 CFR 1926.502

  • Canadian National Building Code,,

  • Ontario Building Code Section,,

CAD Drawings Installation Specifications Submittals Warranty